Custom Mono Switch
Many DJs spend a lot of the time monitoring with one ear but most tracks are in stereo. Because of this it is handy to be able to switch the headphones to mono so you get the full sound from the one ear you are using. Some high end headphones like the pioneer hdj-1000 have […]
Upratign the Jack Connector
Even though all mixers have a 1/4″ headphone connector nearly all DJ headphones have a 3.5mm jack with a 1/4″ adaptor. Here at custom cans we like to give the option uprating the 3.5mm jack to a proper 1/4″ jack. This gives not only better sound as there are fewer connections but also means you […]
Bad Data Pioneer HDJ-1000
Here is the newly finished Bad Data Pioneer HDJ-1000. They were tough to do as the HDJ-1000 come into about 1000 pieces. Also I had to use a special matt clearcoat which is no where near as tough as the polly coat I normally use so I had to apply about 15 layers until I […]
First Pair of Technics RP-DJ1210 headphones
As you may have seen I have had a pair of these technics 1210 headphones in the works. They are not one of the normal models I do but I am always up for a new chalange. And… Here is the finale result I have half wrapped the cable and the logo glows in the […]
ROTM HD-25-1
I have finally finished The ROTM HD25s in a porcelane white and marker. Then covered in a protective varnish. I was going to go with a white cable but decided to go with a UV wrapped green one instead. They were fitted with a gold 1/4″ jack to go straight into the mixer with no […]
South Park style Headphones
Here are some Stenciled OEM Headphones that have just been finished For more details check out CustomCans
Ciroloco headphones
Here are some OEM DJ headphones with the ciroloco logo on For more details check out CustomCans